Measuring tools

Solid analog caliper with a clamp lock, suitable for most measuring tasks. Measures from 0 to 150 mm with a 0.05 mm vernier scale and a jaw length of 40 mm

Solid caliper with a screw lock and fine adjustment screw, suitable for most measuring tasks. Measures from 0 to 500 mm with a 0.05 mm vernier scale and a jaw length of 150 mm

Solid caliper with a screw lock, suitable for most measuring tasks. Measures from 0 to 100 mm with a 0.05 mm vernier scale and a jaw length of 30 mm.

Standard digital caliper made of stainless steel. Measuring range from 0 to 150 mm with 0.01 mm reading and a jaw length of 40 mm.

Standard digital workshop caliper in stainless steel. Measures from 0-200 mm with 0.01 mm reading and jaw length of 50 mm. Manual on/off, reset, switch from mm to inch and flat depth gauge

Digital caliper made of stainless steel. Max/min value function. Hold function. Switchable between millimeters and inches. Adjustable absolute value. Fine adjustment screw. DIN 862. Includes battery type CR2032.

Electronic level that measures in mm/m, percentages, or in/ft. It measures angles in 0.05 increments and features a HOLD function, reference comparison, and zeroing. Measurement range is 4 x 90°, 1000 mm/m, 100%, and 12 in/ft. It is equipped with magnets on the bottom for easy attachment and stability during use. Includes 2 x AAA batteries.

Made of polished steel, ground and polished, with an extra strong riveted hinge.

Draft survey glass hydrometer is used to determine the density of seawater. It is supplied with a declaration of conformity and an instruction manual.