The RUD RS eye bolt with UNF thread offers a higher Working Load Limit (WLL) than standard DIN 580. Certified and tested by DGUV with a 4:1 safety factor. Designed for extreme conditions from -40 °C to 200 °C. WLL is clearly marked in all directions to prevent overload.
RM eye nut is primarily intended for straight lifting. It is important that the surface under the nut is flat with the base, that 100% of the threads are engaged, and that the nut is properly tightened. The bolt quality must be at least CL 8.8. For angle lifting, the VRM eye nut is recommended.
The RUD ACP-TURNADO OCEANSTAR is the first DNV-certified lifting point designed specifically for underwater applications. Approved for subsea use and protected with a highly durable zinc flake coating, it delivers exceptional corrosion resistance and reliable performance in demanding marine and offshore environments.
RUD VLBG-Z eye bolt rotates freely for optimal alignment of the lift. Please note that the specified angles are not recommended. When using a longer bolt, a minimum of grade 10.9 must be used. The bolt must also be crack tested
Your session has now expired. Please click "OK" to refresh the page and avoid any loss of unsaved data. If you were logged in, you will need to log in again.
Norwegian 
English 
