Eureka wire clamps are an alternative to press locks, and can be used for lifting with just one clamp. Eureka is approved by, among others, the Directorate for the Norwegian Labor Inspection Authority and DNV. NB! For lifts used for passenger transport, at least two clamps must be used.
The upgraded BG-S model from Iron Grip now delivers an efficiency of 100% when using a single clamp. However, for suspension purposes, we recommend using two clamps with a spacing of at least three times the diameter of the wire between them. In dimensions of 3 mm, 4 mm, and 5 mm, the clamps will then meet the requirements of the standard for pressed terminations, NS-EN 13411-3.
A popular wire clip used with casing slings for bundling pipes. The clip ensures that the sling does not open when the crane sets down the load. To eliminate the risk of the clip falling off, it is equipped with a separate wire that is looped around the casing sling. The clip is suitable for wire dimensions from 16 mm up to and including 25 mm.
Your session has now expired. Please click "OK" to refresh the page and avoid any loss of unsaved data. If you were logged in, you will need to log in again.